Today I present my Ku-Band spectra, feed reports and transponder list from DirecTV 9S and SES 1 @ 101.0 West.
Variables set at:
TBS6983 Mode = Active
LNB_NF = 0.75
SRmin = 1000
SRmax = 10000
.
Feed Report for 12603R (DSS transponder)
Feed Report for 11706V
thank you very much moonbase
We can see clearly that dF-Ultra-spectrum can detect DCC & DSS signal 
IQmonitor's feed-report can detect also the correct Symbol Rate of DSS transponders
may be with little modification in IQmonitor you can find also the correct Symbol Rate of DCC too 
I hope that if you can continue the test ; it is steel interesting to see feed-report for ABS-S & ISDB-S
for example in ISDB-T there are ; QPSK & 8PSK & TC8PSK ! what is TC8PSK???! 
final test will be feed-report for NS3/4 transponders with IQmonitor ,and how it will be Symbol Rate with IQmonitor's feed-report ?
Best Regards
flie
Test @ 30.5°E C-Band Max-resolution with IQmonitor-Lite , I use also manual scan .
Because of cross polarization in my Crazyscan_Blindscan2 results ..it is very clear that in C-Band ; IQmonitors's dF-Ultra_sectrum results is Best 
Crazyscan_Blindscan2 result;
[SATTYPE]
1=0305
2=1.80m/Panorama 13K @ some place on earth (22.8N,5.5E) / TBS5927
[DVB]
0=25
1=3759,V,6999,? ;3.4 (3.1) dB; 20:38 15/1/2021 No-locked
2=3769,V,6999,34,2 ;2.8 (-1.23) dB; 20:38 15/1/2021 No-locked
3=3774,H,21920,34,4 ;4.4 (-8.63) dB; 20:38 15/1/2021
4=3847,V,14370,23,3 ;6.7 (-2.27) dB; 20:38 15/1/2021
5=3895,H,44995,? ;3.4 (3.1) dB; 20:38 15/1/2021
6=3895,V,44995,13,2 ;9.7 (10.94) dB; 20:38 15/1/2021
7=3927,H,13440,34,4 ;0.4 (-12.63) dB; 20:38 15/1/2021
8=3927,V,13440,23,2 ;9.6 (2.68) dB; 20:38 15/1/2021
9=3946,V,3558,89,3 ;12.6 (-0.59) dB; 20:38 15/1/2021
10=3957,H,7367,78,1 ;-10 (-17.24) dB; 20:38 15/1/2021
11=3966,H,4790,34,4 ;9.5 (-3.53) dB; 20:38 15/1/2021
12=3974,V,16200,56,2 ;4.7 (-0.78) dB; 20:38 15/1/2021
13=3988,H,8631,34,3 ;11.3 (1.09) dB; 20:38 15/1/2021
14=4000,V,1409,? ;7.1 (6.8) dB; 20:38 15/1/2021
15=4022,H,6179,34,4 ;14.8 (1.77) dB; 20:38 15/1/2021
16=4022,V,6179,34,4 ;7.7 (-5.33) dB; 20:38 15/1/2021
17=4076,H,2093,34,4 ;13.6 (0.57) dB; 20:38 15/1/2021
18=4076,V,2093,56,3 ;3.5 (-8.41) dB; 20:38 15/1/2021
19=4088,V,16200,56,2 ;7.7 (2.22) dB; 20:38 15/1/2021
20=4104,V,3609,34,2 ;6 (-1.91) dB; 20:38 15/1/2021
20xxx=4104,H,3609,34,2 ;12.2 locked manually but not listed in Crazyscan !!!
21=4113,V,12500,35,2 ;6.5 (0.7) dB; 20:38 15/1/2021
22=4132,H,16665,34,4 ;0.8 (-12.23) dB; 20:38 15/1/2021
23=4132,V,16665,34,4 ;9.6 (-3.43) dB; 20:38 15/1/2021
24=4165,H,30000,34,4 ;0.2 (-12.83) dB; 20:38 15/1/2021
25=4165,V,30000,34,4 ;8 (-5.03) dB; 20:38 15/1/2021
Alles anzeigenthank you very much moonbase
I hope that if you can continue the test ; it is steel interesting to see feed-report for ABS-S & ISDB-S
for example in ISDB-T there are ; QPSK & 8PSK & TC8PSK ! what is TC8PSK???!
final test will be feed-report for NS3/4 transponders with IQmonitor ,and how it will be Symbol Rate with IQmonitor's feed-report ?
Best Regards
flie
There are active NS3/NS4 transponders in Ku-Band on 7.0E and 10.0E. Anyone with access to these satellites and the relevant beams can run scans and reports to check if IQ Monitor is capable of registering the correct SR. My guess is that IQ Monitor will not be able to correctly register the SR for NS3/NS4 using a TBS card.
I do not have access to the two satellites with ABS-S and ISDB-S transponders.
Today I present my Ku-Band horizontal polarity spectrum and transponder list from Galaxy 13 and Horizons 1 @ 127.0 West.
Variables set at:
TBS6983 Mode = Not Active
LNB_NF = 0.75
SRmin = 1000
SRmax = 10000
.
I do not have access to the two satellites with ABS-S and ISDB-S transponders.
About ISDB-S.... we'll wait until some one from Japan or China join this forum 
I hope if peon can repeat the test of ABS-S signal with IQmonitor H.R.Spectra and take feed-reports from ABS-S transponders
after all... He is the one who see ABS-S with Sato at the first time :
Test with very low signal @ 30.5°E C-extended ....my signal is very low !!! because I tested with home made feed horn !
Today I present my Ku-Band vertical polarity spectrum and transponder list from Galaxy 13 and Horizons 1 @ 127.0 West.
Variables set at:
TBS6983 Mode = Not Active
LNB_NF = 0.75
SRmin = 1000
SRmax = 10000
.
Another @ 42.5°E C-Band...Max-resolution
apparently all transponders are between 3500-3620 Mhz !
Nigeria channels are reported here :
I add also result with Crazyscan_Blindscan2 :
[SATTYPE]
1=0425
2=1.80m/panorama 13k @ some place on earth (22.8N,5.5E) / TBS5927
[DVB]
0=12
1=3530,H,16550,34,4 ;5.2 (-7.83) dB; 12:12 17/1/2021 GS No-locked
2=3564,H,1054,56,2 ;5.3 (-4.05) dB; 12:12 17/1/2021
3=3566,H,999,34,2 ;8.8 (0.89) dB; 12:12 17/1/2021 TV
4=3570,H,999,12,2 ;1 (0) dB; 12:12 17/1/2021 Radio with very low signal !
5=3577,H,1054,34,2 ;10.4 (2.49) dB; 12:12 17/1/2021 TV
6=3577,V,1054,34,2 ;0.9 (-7.01) dB; 12:12 17/1/2021
7=3584,H,1299,34,2 ;3.3 (-4.61) dB; 12:12 17/1/2021
8=3586,H,1299,34,2 ;2.6 (-5.31) dB; 12:12 17/1/2021
9=3590,H,1299,34,2 ;10.9 (2.99) dB; 12:12 17/1/2021 TV
10=3590,V,1299,34,2 ;3.3 (-4.61) dB; 12:12 17/1/2021
11=3592,H,1299,34,2 ;5.4 (-2.51) dB; 12:12 17/1/2021
12=3607,H,11680,34,4 ;5.8 (-7.23) dB; 12:12 17/1/2021 GS
Another test @42.5°E but with another Lnb California Amplifier single polarity...this Lnb work great even with home made feed horn
3500 - 3620 Mhz IQmonitor_Lite Max_resolution
C-Band @46°E ...there are too many transponders
Beim Start von IQMonitor gab es doch "start vlc".
Auf all meinen PC's, unabhängig von der IQMonitor Version habe ich nur noch "stop vlc", ohne dass vlc läuft und auch nicht im Taskmanager sichtbar wäre.
Hat jemand eine Idee?
When IQMonitor was started there was "start vlc".
On all my PCs, regardless of the IQMonitor version, I only have "stop vlc" without vlc running and not being visible in the task manager.
Does somebody has any idea?
Ich bekam schon vor dem tune eine Fehlermeldung, hat wohl mit den Fake-Transpondern zu tun.
Nach der Installation des neuen VLC habe ich wenigstens schon den ersten PC wieder unter Kontrolle gebracht, die anderen werden auch noch gezähmt.
unfortunately this will be my last test for IQmonitor lite ...I hope when I come back to continue testing
51.5°ُُE C-band ....IQmonitor-lite Max_resoluton
stay safe and take care of yourselves
Best regards 
flie .
Bonjour Flie
Prends bien garde à toi et reviens nous en pleine form 
Take care and come back to us in good shape
Ich bin jetzt verunsichert und es betrifft alle Versionen des IQMonitors.
Nachdem ich versuchte mit dem IQMonitor auf meiner T90 auf den Türksat zu schalten, mußte ich feststellen, dass hier etwas nicht stimmt.
Auf diesen Satellit schaltet mein Multischalter mit dem uncommitted Befehl Port 2 und den committed Befehl LNB3 - BA
Die Befehlsfolge müßte [E0 10 39 F1] [E0 10 38 F8] sein. Der IQMonitor, zumindest dessen Anzeige, liefert allerdings [E0 10 38 F1] bei Port2.
I am now confused and it affects all versions of the IQMonitor.
After I tried to switch to the Türksat with the IQMonitor on my T90, I discovered that something was wrong here.
My multiswitch switches to this satellite with the uncommitted command port 2 and the committed command LNB3 - BA
The command sequence should be [E0 10 39 F1] [E0 10 38 F8]. The IQMonitor, at least its display, delivers [E0 10 38 F1] for Port2.
My failed attempt to receive Radio Tendance Ouest shows a spectrum anomaly
Ich editierte die Datei IQmonitor_Lite.INI zu diesen Einträgen
I edited the IQmonitor_Lite.INI file for these entries
[FREQUENCY]
Band=Ka(D) 21.2-22.2 GHz
FLo1=20250
FLo2=20250
Fswp=22200
Fmin=21200
Fmax=22200
Fstart=21530
Fstop=21650
Polarity=H/L 18V
Ftransponder=21535000
ItemIndexPol=0
und habe fehlehafte Frequenzen in den Feldern stehen. and have incorrect frequencies in the fields.
Ich trage die richtige Frequenz ein, schließe das Programm.I enter the correct frequency, close the program.
In der INI stehen nun diese Werte:
The INI now contains these values:
[FREQUENCY]
Band=Ka(D) 21.2-22.2 GHz
FLo1=20250
FLo2=20250
Fswp=22200
Fmin=21000
Fmax=22200
Fstart=21530
Fstop=21650
Polarity=H/L 18V
Ftransponder=21535000
ItemIndexPol=0
Ich starte das Programm und habe wieder die falschen Werte drinnen stehen
I start the program and have the wrong values again.
Nun stehen aber auch die falschen Werte in der INI.
But now there are also the wrong values in the INI.
[FREQUENCY]
Band=Ka(D) 21.2-22.2 GHz
FLo1= 9750
FLo2=10600
Fswp=11700
Fmin=10700
Fmax=12750
Fstart=10700
Fstop=12750
Polarity=H/L 18V
Ftransponder=
ItemIndexPol=0
Kann das bitte mal jemand überprüfen?
Can someone check it out, please?
Auch mit “get lock” “set filters” wurde nicht immer ein TS-File angelegt, da kenne ich aber die Zusammenhänge noch nicht genau.
Even with “get lock” “set filters” a TS file was not always created, but I don't yet know the exact context.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!
