Hi Flie,

I used the 6903x card with IQmonitor_2407 at 15.0W. I was able to lock the signal and get FeedReport on 11013 V with StreamReader version 109. Does not work with versions older than 101. I only got a lock on one transponder. But for what I/you wanted to achieve, I think it's enough. The High Spectra scan took a long time.

Regards

I tried again to lock the second transponder,11037 V.107140,3/4 at 15.0W, with IQmonitor 2407. This time, I partially correctly succeeded in getting the spectrum, but also a FeedReport.

Zitat von satesco

I used the 6903x card with IQmonitor_2407 at 15.0W

good to see the first feed-report for higher SR Transponder than 67500

I think it is better to use Streamreader 1.2.4.100 with IQmonitor 2407 , Because the device name would not appear in feed-report with newer streamreader ,also to see devices list on this version of IQmonitor 2407

hopeful that one day Strannik and Crazycat make Blindscan's sofwares works with higher SR Transponder than 67500 ( for example up to 180000 at least for TBS6903X) who knows ; may be one day we could see transponders with high SR like that !

I hope if Strannik make an Independent version of IQmonitor -only as a test version- which works with Blindscan2 only for montage-cards like TBS6902se,TBS6904se,TBS5930 ,I know he can do it ; but he doesn't have time I think

@ 15°W with my 1.80m signal increase only with 2.4dB (comparing with my little dish 0.90m)

no signal for these high SR Transponders here

Zitat von flie

...

hopeful that one day Strannik and Crazycat make Blindscan's sofwares works with higher SR Transponder than 67500 ( for example up to 180000 at least for TBS6903X) who knows ; may be one day we could see transponders with high SR like that !

I hope if Strannik make an Independent version of IQmonitor -only as a test version- which works with Blindscan2 only for montage-cards like TBS6902se,TBS6904se,TBS5930 ,I know he can do it ; but he doesn't have time I think

...

Alles anzeigen

strannik said he depends on Crazycat's file (StreamReader) for his app. But CrazyCat has foreseen the possibility that some demodulators can display professional parameters, as the 6903x card has. It was helped by the stid135 demodulator of this card, which on the previous page, at #1874, you posted the parameters from the card specification. For example, at 8PSK, this demodulator knows 120 Msymb/s, and both transponders are in turbo-8PSK mode and use a high symbol rate, in the range up to 120. Therefore, because they use the same StreamReader file, both Crazyscan and IQmonitor manage to display this symbol rate.

Actually, you wish Blindscan can lock a high symbol rate fulfilled by both applications. So it is not up to these applications to display these parameters, but to the demodulators of the dvb cards, i.e. if they have support for such parameters. Fortunately, the demod stid135 from STM has this support. Have not yet checked the 6909X card. But I don't expect other dvb cards to know how to lock such a high symbol rate.

You are right that Strannik should implement this function,BLscan2. It is not by chance that I posted EBSpro, because Christian, when he built his app years ago, realized that Blscan2 is just as important as blscan. Even if he neglected his application, it is able to handle all the cards that have appeared afterwards.

Here are the specifications of the 6903x and 6909X cards. Differences seem to matter not much, but we have to keep that in mind.

Ich frage mich warum meine TestMER Fenster bei gleicher Programmversion anders aussehen.

An "accurate" oder "dF", was ich erst dachte liegt es jedenfalls nicht.

I wonder why my TestMER windows look different with the same program version.

In any case, it is not because of "accurate" or "dF", which I thought at first

Интересно, почему мои окна TestMER выглядят по-разному с одной и той же версией программы.

Во всяком случае, это не из-за "точного" или "dF", как мне сначала показалось.

works also with Ka

according to "Test Mer" may be only -0.7dB needed to lock this Transponder !

... und das TestMER Fenster muss schon offen sein! /... and the TestMER window must already be open!

Zitat von femi

Dieser Beitrag wurde zur Weiterentwicklung und Fehlerbehebung des IQMonitorPro geschrieben.

This article was written for the further development and troubleshooting of the IQMonitorPro.

Эта статья была написана для дальнейшей разработки и устранения неполадок IQMonitorPro.

... und hier mir der TBS6904SE / ... and here with the TBS6904SE / ... И вот мне TBS6904SE

Alles anzeigen

same situation created with TBS5927 (children play with my PC when I left for short time )

I think there is a big chance to make IQmonitor works with these TBS_montage cards

Any way I restart TBS5927 again and it works perfectly (I only need to calibrate my RF_spetrum )

RE: 37.6°W Telstar 11N

Because I don't have version 1014, I ask myself every time I used the HR Spectrum Mode, if there is a difference, both in finding and locking transponders, but especially if the new version brings new features to the application?

I chose to scan with IQmonitor 1013 Intelsat at 1.0W, which in my area has both DTH signal and dx signal. I would like those who have IQmonitor 1014 to post the results they get with this version of the app.

I would like a scan on both polarities, as I did. Thanks

A 5927 USB scan with IQmonitor 1013 only on a polarity at 1.0W. As expected, no difference between this device and the 6983 card. Same search and lock time, and about the same results obtained.

Hier mein Weihnachtsgeschenk an dich.

Leider hast du mir deine Einstellungen verheimlicht. Im Wesentlichen sieht es gleich aus, wobei zwischen 11000 H und 11200 H bei dir die Transponder besser ankommen.

Im Scan ist alles automatisch gefunden worden, ein paar Transponder gingen noch manuell.

Iată cadoul meu de Crăciun pentru tine.

Din păcate, mi-ai păstrat setările secrete. Practic arata la fel, cu intre 11000 H si 11200 H transponderele sunt mai bine primite de tine.

Totul a fost găsit automat în scanare, câteva transpondere încă funcționau manual.

I have been working with the IQ monitor almost since the beginning of its development. I haven't found a difference in scanning sensitivity in recent versions. The improvements are only in the extension of the signal analysis capabilities.

The author Yuri would be able to clarify the practical differences in scanning in the latest versions.

I think the DX-ers needs maximum sensitivity and range of parameters to look for new transponders.

But it largely depends on the HW used

Thank Femi for "the gift". I'd like to give you something similar this holiday season. But I rely on the fact that a hardened enthusiast like you enjoys what he gives himself, that is to achieve performances that he has not achieved. [(t's hard to express your thoughts through emoticons, especially since your/ours options are limited and out of reach)

I note that versions 1013 and 1014 do not differ in this respect. Those differences are more related to the card used, i.e. 6983 is slightly better than 6908. Or I'm looking to see what's new in version 1014, apart from the search time and signal lock?

I wish you a Merry Christmas now, and may Santa put more transponders found and locked on your tree.

Zitat von Peon

I have been working with the IQ monitor almost since the beginning of its development. I haven't found a difference in scanning sensitivity in recent versions. The improvements are only in the extension of the signal analysis capabilities.

The author Yuri would be able to clarify the practical differences in scanning in the latest versions.

I think the DX-ers needs maximum sensitivity and range of parameters to look for new transponders.

I totally agree with what you said about IQmonitor. If only Yury would listen to us and be able to. I'm hopeful he'll succeed, knowing him to be a perfectionist (a blessing and a curse at the same time).

Merry Christmas, and wish you could get what you couldn't so far.

Thank you and I wish everyone a happy and peaceful Christmas and good health under the tree.

IQmonitor 1013 scanning Astra 19.2E with 6590 card in 7 minutes. With 9 MHz steps, I got the fastest scan time with a s2x card with this app.

Here are two videos of this card scanning with IQmonitor and Crazyscan.

Merry Christmas to all the DX community