You are right satesco , this streamreader is ok, I had install the TBS driver again and it's worked.
I hope I do not have to create a batch file to install this driver each time before launching ESBpro.
If that works with the Diseqc now synonymous
You are right satesco , this streamreader is ok, I had install the TBS driver again and it's worked.
I hope I do not have to create a batch file to install this driver each time before launching ESBpro.
If that works with the Diseqc now synonymous
Last week I started a scan on Astra, the result: 48 Transponders.
All transponder > 12515 Mhz wasn't found.
Now I'll try another satellit.
ZitatOriginal von femi
Last week I started a scan on Astra, the result: 48 Transponders.
All transponder > 12515 Mhz wasn't found.
Now I'll try another satellit.
What Astra is this about?Be more precise!
Tbs6903X found 12515 H on Astra 19.2E
Added:TBS6903X-EBSpro_19.2E
EBSpro verweigert Scan, beim IQMonitor könnt ich das Spektrum auch mit Paint zeichnen.
Was ist da los?
Test with both tbs6903x tuners running 4K and 8K simultaneously at 42.0E.
tbs6903x Tuner 0-DVB Dream 4K and Tuner 1 SmartDVB 8K,
tbs6903x Tuner 0-DVB Dream 4K and Tuner 1 DVBViewer 8K.
I think it is self-evident that you need powerful resources on the computer to keep both players running smoothly.
Do both tuners have to be connected? If that leads to success
So far, I have only one active, but it does not matter with which the failure occurs.
Hallo femi,
einfach auf DVB-S2X klicken , und nicht auf 6983.
da wird es wahrscheinlich was kommen , nicht sehr schön weil sowieso IQMonitor und DVB-S2X nicht unbedingt total passend sind.
Ein Versuch ist aber Wert.
Viel Glück
ZitatOriginal von femi
Do both tuners have to be connected? If that leads to success
So far, I have only one active, but it does not matter with which the failure occurs.
Yes,both 6903X tuners 0 & 1 must be connected to a satellite signal source!But before that,I recommend that you check the signal separately on each tuner with dvbs player that you want to use.
In the picture below,I connected the tuner 0 on Astra 19.2 E using DVB Dream,and the tuner 1 on SES-4 also with DVB Dream.
I used this player because it is the most flexible of all that I have,and besides,you can install them as many as you want without conflict.The images on each player run smoothly without interruption.
Installing 6903X/6909X cards on Linux/Ubuntu does not pose any problem if you follow the instructions for installing the drivers from here.I worked with both cards on Ubuntu 18.04.It is the best solution for IPTV streams.I checked this using the Astra Cesbo server.You can run any program tv smoothly and can be distributed wherever you want.
it becomes this time without the noisy fan
in fact in the desert region , I prefer if the noisy-fan still exists
Hi @file,
Congratulations for tbs6903X card. I hope it's up to your expectations.I don't know why they changed the fan to a radiator at 6903X? Someone must have complained?With the fan,chip temperature is between 35->40°C.I'm curious to know how much is with the radiator?
Regards
It looks easy though, to mount a little fan on the cooling ribs.
And there are even separate PCI-slot fans?
P.S.: today the motherboard of my PC (Acer M3300 of 2010) finally died
But a new PC (HP Pavilion 595-p0989nd) ordered today and should arrive tomorrow already
thank you satesco
unfortunately I can't use it now , I work now only with laptop
my desktop pc is dead for a long time !..sadly I have to find an other desktop-PC
I buy TBS6903X only because STiD135 ...one day I hope it will be very useful
and about the fan ...we can use separate fans like what hvdh said
I don't know if I can use these things to connect tbs6903x with a lap top seems too risky !
hello Satesco & peon
How can you work with Crazyscan & TBS6903X ? I tray may times but it doesn't work ??!!
and what about these transponders on 21.6°E ?: Generic stream or Encapsulated ??
10730 V 45000 Qpsk2 4/5 MIS{1} ACM/VCM???
10918 V 45000 Qpsk2 4/5 MIS{1} ACM/VCM???
11109 V 1868 Qpsk2X 13/18 MIS{0} ACM/VCM???
ZitatAlles anzeigenOriginal von flie
hello Satesco & peon
How can you work with Crazyscan & TBS6903X ? I tray may times but it doesn't work ??!!
and what about these transponders on 21.6°E ?: Generic stream or Encapsulated ??
10730 V 45000 Qpsk2 4/5 MIS{1} ACM/VCM???
10918 V 45000 Qpsk2 4/5 MIS{1} ACM/VCM???
11109 V 1868 Qpsk2X 13/18 MIS{0} ACM/VCM???
yes they are Transport ACM/VCM MIS ! can be found with TBS5521 too !
apparently TBS5521 multiply the number of GS-Transponders !!!
with TBS5927 the only not found is 11109 V 1868 Qpsk2X .
Already reported as Transport Multi-stream with IQmonitor-Feed report But I didn't read it ! [Blockierte Grafik: https://sat-dx.club/images/smilies/facepalm.gif]
Hi flie,
Instead of explanations,better download v.Crazyscan that I use for tbs6903x card.I hope you use it without any problems.
With this I recently scanned,besides other positions,37.5W.
Regards
ZitatOriginal von satesco
Hi flie,
Instead of explanations,better download v.Crazyscan that I use for tbs6903x card.I hope you use it without any problems.
Regards
thank you very much Satesco
I will tray your Crazyscan version .
Best Regards
flie.
thank you again Satesco
finally crazyscan works for me with TBS6903X ! I didn't know that there are 04 versions of CrazyScan 10216 !!
Unfortunately it has a very bad spectrum with TBS6903X ,any way it is better than no thing !
It appears that this spectrum made by Crazyscan is very similar with the IQ-spectrum made by IQmonitor H.R.Spectra but may be with small N values .
Even with small "N" value with IQmonitor H.R.Spectra (N=10) ; IQmonitor gets more transponders than Crazyscan !
IQ-spectrum with Crazyscan changes always ,I am sorry for telling this But "Crazyscan need to be more Developed !"
for me the best Blindscan tool for TBS6903X is now IQmonitor with H.R.Spectra
some thing is wrong with this card TBS6903X
there is no thing in Ku-high can be seen from my area ...checked many times with TBS5927 with Crazyscan and IQmonitor H.R.Spectra
TBS6903X ..Chip temperature: 52°C
ZitatOriginal von flie
some thing is wrong with this card TBS6903X
there is no thing in Ku-high can be seen from my area ...checked many times with TBS5927 with Crazyscan and IQmonitor H.R.Spectra
TBS6903X ..Chip temperature: 52°C
I do not know how you can use IQM for 6903X.To my shame,I did not manage to use this card for IQm,although I met Strannik's recommendations.
Without going into the details of the app,I am now referring only at the high temperature you noticed on 6903X card.In my opinion,it may be wrong,this temperature that this card shows while working with IQmonitor is determined by the extraordinarily long scan time.Actually the card is under a long-term stress during the scan,so I am not surprised that the temperature reaches high values.But don't worry,this temperature still doesn't jeopardize the integrity of the card.In other words,iqm performance is achieved at the cost of this very long time of scan. If Strannik will not optimize his application so that there is a fair balance between performance and this scan time,then I do not know who will have the patience to use it.
I'd rather be wrong in this case than to be right.
At a regular use of 6903X,say with Crazyscan,the temperature only rarely exceeds 40 degrees.
StreamReader for 6903X has a bug which consists of the fact that some frequencies from the low band are repeated in high band,such as 12725 V at 60.0E.
Regards
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!