16.0°E Eutelsat 16A

  • Hi Stephan, :70:

    It's like you write. Signal level fluctuations started after the packet was started at 21612GHz. I don't know why this is so, maybe they have adjusted the directional diagram of the transmitting antennas, or the power is not enough. I also thought it was just in my position.:28:

    Geoposition: 48,71N, 21,92E. Promax Ranger Neo 2, TBS5925 :73: , TBS6983, TBS6903, TBS6903x, TBS6903x V2, TBS6522, TBS5520SE, TBS5927, TBS5590, Prof7301, PF 250cm, ADE antenna 370cm. Full band LNBs: S, L, C: NJS8487S PLL , NJS8488S PLL, X PLL, Ku NJR2842S PLL, Bullseye 10kHz PLL, full Ka band PLL, and other iron for DX reception, 53W - 98E. :68:

  • today's scan:


    stephan94:

    Hier gibt es, im Gegensatz zu 39°E keine falschen Einträge im TSReader.

    In contrast to 39°E, there are no incorrect entries in the TSReader.

    Wer nicht die Antennengröße und den ungefähren Standort angibt, postet sinnlos, sofern es um eine Signalerfassung geht.

    If you don't specify the antenna size and the approximate location, posting is useless if it's about signal acquisition.

    • Offizieller Beitrag

    Heutige Blindscan bei mir .

    sehr sehr Ähnlich ,

    von 21557 keine Spur.


    Today's blind scan on me .

    Very very similar ,

    no trace of 21557

  • my scan today


    Geoposition: 48,71N, 21,92E. Promax Ranger Neo 2, TBS5925 :73: , TBS6983, TBS6903, TBS6903x, TBS6903x V2, TBS6522, TBS5520SE, TBS5927, TBS5590, Prof7301, PF 250cm, ADE antenna 370cm. Full band LNBs: S, L, C: NJS8487S PLL , NJS8488S PLL, X PLL, Ku NJR2842S PLL, Bullseye 10kHz PLL, full Ka band PLL, and other iron for DX reception, 53W - 98E. :68:

  • It's good that I don't have dreams of 21557 alone :17:

    I become different SR's, but always 32APSK in TestMER


    Wer nicht die Antennengröße und den ungefähren Standort angibt, postet sinnlos, sofern es um eine Signalerfassung geht.

    If you don't specify the antenna size and the approximate location, posting is useless if it's about signal acquisition.

    • Offizieller Beitrag

    Ich auch .

    ein einziges Mal .

    Ich habe mehrere mal probiert ,und nur einmal habe ich was bekommen ,

    es ist aber auf meinem Spectrum wirklich nicht zu sehen oder zu ahnen.


    Me too,

    only once.

    I tried several times and only got something once,

    but it really cannot be seen or suspected on my spectrum.

  • Geoposition: 48,71N, 21,92E. Promax Ranger Neo 2, TBS5925 :73: , TBS6983, TBS6903, TBS6903x, TBS6903x V2, TBS6522, TBS5520SE, TBS5927, TBS5590, Prof7301, PF 250cm, ADE antenna 370cm. Full band LNBs: S, L, C: NJS8487S PLL , NJS8488S PLL, X PLL, Ku NJR2842S PLL, Bullseye 10kHz PLL, full Ka band PLL, and other iron for DX reception, 53W - 98E. :68:

    • Offizieller Beitrag

    @Peon


    Thanks! :17: Very quickly and efficiently.

    You have a very good setup with low noise floor. :73:I hope that you saved the measured 0.57dB in the ini file.

    It became clear from the legs of the low-speed transponder that the noise level can be lowered to -55 or even -57dB.

    Experiment ...


    Good luck

    • Offizieller Beitrag

    Heute habe einen Versuch gemacht mit LNB_NF=0.70

    und auch mit fast gleiche parameter wie Peon.

    Das Wetter ist sehr schlecht , Empfang ist nicht besonderes gut ,

    deshalb sind alle Transponder nicht sofort gefunden.


    Today I made a test with LNB_NF=0.70

    and also with almost the same parameters as Peon.

    The weather is very bad, reception is not particularly good,

    therefore all transponders are not found immediately.

    • Offizieller Beitrag

    @stephan94


    Ihr Programm ermittelt LNB_NF = 0.55


    Im Spektrum sehe ich LNB_NF = 2.0 - dies ist ein ungewöhnlicher Betrag für Ihr Empfangssetup.

    Bitte überprüfen Sie, was Sie in die ini-Datei geschrieben haben, die Sie beim Start des Programms laden.


    Noise Level = -60

    Min Level RF = -60

    Max RF = -45dBm


    Vielen Dank! Gesundheit und Erfolg! :150:


    • Offizieller Beitrag

    Leider muss ich einen Fehler machen,

    aber ich weiß nicht, wo?

    mit LNB_NF=0,55

    noise =-60

    MinRF=-60

    es ist nicht verwendbar


    unfortunately I must make a mistake,

    but I don't know where ?

    with LNB_NF=0.55

    Noise=-60

    MinRF=-60

    it is not usable

    • Offizieller Beitrag

    konnte es sein , dass es nur mit KA Band zu tun hat ?

    Ich habe gerade eine Probe auf 16°ost in KU band mit

    diese Zahl , und es geht , ohne dass ich den Computer neu starten musste

    • Offizieller Beitrag

    Jetzt ist es OK mit den Zahl ;55; -60 ;-60.

    Was ich nach der Zahländerung machen müsste

    zuerst mit Crazyscan oder EBSPro meine TBS Treiber nutzen.

    Jetzt werde ich in KA Band probieren

    • Offizieller Beitrag

    Jetzt habe ich gefunden ( glaube ich )

    Ich glaube 21530 bis 21630 zu suchen war zu kurz

    mit 21500 bis 21700 geht es ganz gut

    • Offizieller Beitrag

    Früh am Tag sind die Ergebnis deutlich besser .

    Alle 11 Transponder wurden problemlos sofort gefunden.

    Danke an Strannik für seine Hilfe.:74:


    Early in the day the results are much better.

    All 11 transponders were found immediately without any problems.

    Thanks to Strannik for his help.:74:


    В начале дня результаты намного лучше.

    Все 11 транспондеров были найдены сразу же без каких-либо проблем.

    Спасибо Strannik за помощь.:74:

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!