Moving Big Dish to New Location

  • Yesterday we moved my big dish to the new house in town. Very long planning but everything all right.
    First some morning pictures from old location to the assembly on special truck. Click on the photos to enlarge:


    /edit by qwer: Upload-files have left.


    Then some pictures from the arrival of the truck to new location and new installation. Click on the photos to enlarge:


    /edit by qwer: Upload-files have left.


    In two weeks I will be ready to make the first tests and post them

    Ku>DH 4,25M HH+OMT ADLx2 QPLL SMW-125Gib 28E+2Fracar 100 13/19E-2ChM 120 30W+5W
    C>2 OMT HV/LR+AVCOMM+4LNB NORSAT 3100F-BPF-4 (5G) on 4,25MT
    RotorFeed: C LR/HV+KU H/V
    TBS5925-6983+6908
    RC2000C

    • Offizieller Beitrag

    Well done !


    And nice job, I am impressive to see such big dish on a 'regular' roof, what is underneath the roof ?, huge concrete base ?

  • Zitat

    Original von Feedsat
    Well done !


    And nice job, I am impressive to see such big dish on a 'regular' roof, what is underneath the roof ?, huge concrete base ?


    Concrete and the base stand goes down to my room house fixed to the floor. Base stand 8mm thick.

    Ku>DH 4,25M HH+OMT ADLx2 QPLL SMW-125Gib 28E+2Fracar 100 13/19E-2ChM 120 30W+5W
    C>2 OMT HV/LR+AVCOMM+4LNB NORSAT 3100F-BPF-4 (5G) on 4,25MT
    RotorFeed: C LR/HV+KU H/V
    TBS5925-6983+6908
    RC2000C

    • Offizieller Beitrag

    :76:

    • Offizieller Beitrag

    Superdish on the road and back home to the roof, great! :76:


    Thanks for sharing to us. :74:


    On that exciting place of your dish, you can DXing nearly without "frontiers". Pretty perfect!


    Ciao
    qwer. :125:


  • Zitat

    Original von qwer
    ...On that exciting place of your dish, you can DXing nearly without "frontiers". Pretty perfect!...


    Thanks to everybody for the opinions....
    I calculated to have free horizon from 83°East to 63° West. Possible obstacle is one roof on the east side about 200Mt far from the antenna. It's possible to overtake it because it must be higher than 10Mt and I think it's not. I'm looking forward to start the test of course shared with this great forum. Thanks again :69:

    Ku>DH 4,25M HH+OMT ADLx2 QPLL SMW-125Gib 28E+2Fracar 100 13/19E-2ChM 120 30W+5W
    C>2 OMT HV/LR+AVCOMM+4LNB NORSAT 3100F-BPF-4 (5G) on 4,25MT
    RotorFeed: C LR/HV+KU H/V
    TBS5925-6983+6908
    RC2000C

  • hi superdish66. 1 have avcomm omt + waveguide + feedring and norsat 8115f.but 1 dont know this how to make modify.i need your omt photos


    /edit by qwer: Upload-file has left.

    Location: Balikesir,Turkey

    Ku-band: Triax110 Famaval125 Gibertini150 channelmaster180
    C-band: PRODELİN 1244 + 8115F + 8000RI + avcomm + ( c1wpll esx241 bsc421 Zinwell )


    DM920 TBS5925

    Einmal editiert, zuletzt von otokoc ()

  • superdish66,


    Congratulations for the mounting of the antenna :76:
    I admit that I envy you collegial,but it is more important to see the results.I wish that they should be on yours expectations.
    regards :125:

    7 antennas,including 2 of 150cm,one T90 with 16 lnbs
    lnb:Inverto Black Ultra with scalar rings and many Ku lnbs,
    C-band LNB:ESX241,Galaxy Inovations,EuroStar,MTI 20K,NS741U C/Ku,Inverto Single C-band Flange,lnb Chaparral Servo Motor & Skew Control
    LNB Ka:R9216DF XWM,Hughes FSS 19.7-20.2 GHz,
    6 satellite receivers,2 Meters,
    7 PC cards(tbs6983,6903,6590,6522,6209,2603,6909X,6903X,6504),3 tuners usb-tbs5927,tbs5925 & SkyStar USB 2 HD,
    Satellite reception between 100.5E-50.0W,
    Loc:Romania :3:

  • Zitat

    Original von otokoc
    hi superdish66. 1 have avcomm omt + waveguide + feedring and norsat 8115f.but 1 dont know this how to make modify.i need your omt photos


    Hi otokoc,
    sorry for this late reply, but I check just now.
    Here are some photos of the OMT and Waveguide. You need to use one tool on the external part of the waveguide in order to make thinner as it could be inserted inside the OMT .... On the other side do the same thing in order to receive the feedring
    Click on phots to enlarge


    Thanks to Satesco for sharing this hard moving .... :125:


    /edit by qwer: Upload-files have left.

    Ku>DH 4,25M HH+OMT ADLx2 QPLL SMW-125Gib 28E+2Fracar 100 13/19E-2ChM 120 30W+5W
    C>2 OMT HV/LR+AVCOMM+4LNB NORSAT 3100F-BPF-4 (5G) on 4,25MT
    RotorFeed: C LR/HV+KU H/V
    TBS5925-6983+6908
    RC2000C

    2 Mal editiert, zuletzt von superdish66 ()

  • muita obrigado superdish66 pra fotos :94:

    Location: Balikesir,Turkey

    Ku-band: Triax110 Famaval125 Gibertini150 channelmaster180
    C-band: PRODELİN 1244 + 8115F + 8000RI + avcomm + ( c1wpll esx241 bsc421 Zinwell )


    DM920 TBS5925


  • Finally I have time to re insert some photos of this big moving; Sat holiday time for me :12:. If anybody needs more, for example from the installation and fixing the pipe, I have some more. Thank You

  • Wow very nice dish congrats :73:,


    I recently sold its little brother a 2.3, i also fabricated the DH H to H but my plans changed and i never used it sent it to the scrap man in the end a shame really it was a nice bit of fabrication but it was no use to me.

  • Very heavy wind and rain storm yesterday here in my town.
    Many trees down and opened roofs as a real battlefield everywhere
    Here is a photo of conditions from city swimming place, near my house.
    Antenna is still there and quite good conditions, but need good checking :125:
    For sure it needs some regulation and calibration (tomorrow) and absolutely planning work to reinforce roof plane with more concrete for better and more solid basement !!!
    Never seen here a kind of super storm like that .....
    Anyway it was good test for antenna

    • Offizieller Beitrag

    Hi superdish66,
    oh horrlble, but good to read about your safety dish! :73:
    A lot of rain here too -Chiemsee/Bavaria- for my mini-camping-dish.
    Greetings
    qwer.


  • Antenna out of work for some days. Gear motor problems, needs replacement ! And some works to do ! See you soon

  • Zitat

    Original von superdish66
    Antenna out of work for some days. Gear motor problems, needs replacement ! And some works to do ! See you soon


    Now, new Gear Motor and some other components.
    Some works are still waiting, bu now antenna is working good

    • Offizieller Beitrag

    Great work, superdish66 - go ahead! :76:


  • In the last ten days, on vacation, I wanted to fix all the InDoor management of my system, especially for wanting to tidy up the cables and devices.

    I have prepared a LAN cabinet in which I have inserted my most used systems and therefore, in addition to the Sat reception, also the network devices.


    As far as Sat reception is concerned, I wanted to try to use a 16-port design 1.1 Diseqc and a 4-output bypass, aware that to try everything together (different receivers), independently, I would have to equip myself with a serious multiswitch system which, however, I don't currently have scheduled as an expense.

    Contrary to what I thought, with Diseqc and bypass, I must say that I do not detect signal losses, at least verifying with systems such as Crazyscan or EBSPro (it would take a serious field meter), and they are in line with the previous reception of the saved Blind scans.


    Here I insert some shots that summarize:

    The LAN cabinet, the Network components (POE Switch, Firewall, 24-port Lan Switch), the Router is positioned above the Cabinet. RC2000C positioner with 2 motor management , 36V superjack positioner , n. 2 last decoders that I'm testing. I have to complete by inserting two more Echostar DVR 7000 and Nokia Mediamaster 9600 memorabilia (I also own Echostar LT 8700 which I will perhaps showcase + several other old Decs now antique)


    Photo also of the back of the PC that I use for the Sat with TBS 6983 + TBS 6908.

    In the closet there is also a TBS 5925 connected to the 4.2Mt Rotor Feed to move the Feed System for which I use a Stab 120 Rotor and I use a SmartDVB App to manage it precisely through the TBS 5925.


    Another shot of the station, the TV system with cable for Skyq and Hotbird cable that goes to the TV, and the surround system.


    Cables coming down from the roof, No. 19 developed as follows:

    Dish 100 cm Hotbird -> LNB DCSS + 3 Legacy -> SKY + TV (Legacy) + Studio (Legacy) + Diseqc port 8 (Legacy)

    Dish 100 cm Astra 19,2 -> LNB Inverto Black ultra single output on Diseqc port 6

    Dish Channel Master 120 dish on 5 ° West -> LNB Inverto Black Ultra single output on Diseqc port 7

    Dish Gibertini 125 dish on Astra 28,2 -> LNB Inverto Black Ultra single output on Diseqc port 5

    Dish DH 4,2Mt -> OMT ADL + 2 LNB QPLL SMW for KU Band (One cable for H, one cable for V) on Diseqc ports 9 and 10

    Dish DH 4,2Mt -> OMT AVCOMM + 2 LNB PLL Norsat 3120 (One cable for H, one cable for V) on Diseqc ports 1 and 2

    Dish DH 4,2Mt -> OMT AVCOMM + WAVE GUIDE AVCOMM + 2 LNB PLL Norsat 3120 (One cable for L, one cable for R) on Diseqc ports 3 and 4

    Cable for TBS 5925 as above

    N. 5 surplus cables, already crimped, both above and below, available for further new situations


    Ku>DH 4,25M HH+OMT ADLx2 QPLL SMW-125Gib 28E+2Fracar 100 13/19E-2ChM 120 30W+5W
    C>2 OMT HV/LR+AVCOMM+4LNB NORSAT 3100F-BPF-4 (5G) on 4,25MT
    RotorFeed: C LR/HV+KU H/V
    TBS5925-6983+6908
    RC2000C

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!