Signal on my place 11270 V
26.0°E Badr-7
-
-
10970 V (27500 8PSK according to a french board contributor)
even with a 'good' looking signal, I have nothing BS or hard. -
open John3 16TV reception with 13,6dB F16
regardsEdit: no picture with Octagon SF 4008, only audio
-
10971 V 27500 5/6 DVBS2/QPSK
2m dish.
-
-
@ Feedsat in this morning I surprised could read 13,6dB and I was sure I had a wrong polarisation; now I changed in horizontal polarisation; but there was no signal, the same like yours.
searching with verticaly I found channels like listed by flysat; so I was sure I had taken the correct polarisation.
Just, small raining, F16 shows me 8,6dB.maybe the uplinkstation was always testing.
regardsby steps an information: of cause my motorisized Lam. 180 had a fall out I must now make a great unstruction in multifeed with several dishes
T90, Gib. 125, Gib 150 and three Lam. 180 (stationäry) with about 26 satellites (kaskade). -
OK, thanks, I was just a bit surprised with your signal level report
Couldn't you show and share screenshots, for your future contributions ? very helpful for everyone
thanks in advance
-
I hope to work with webif.
thanksoctagon sf 4008 had 12dB, now 8dB; user Fidu (he noticed also) talked with me also about pass back of the signal in the last 4 hours.
-
that's usual wnen we are on the boarder of the beam, the signal strenght follow the satellite (which is always in movment)
-
Changing parameter now:
10970 V 27500 2/3 DVB-S2 8PSK
-
Zitat
Original von qwer
Changing parameter now:10970 V 27500 2/3 DVB-S2 8PSK
Signal on my place
Changing FEC and modulation.
10970 V 27500 3/4 DVB-S2 QPSK -
Zitat
Original von pawelwa
Signal on my place
Changing FEC and modulation.
10970 V 27500 3/4 DVB-S2 QPSKThanks pawelwa, yes, I can confirm.
PS: My dish pointed now to Badr5, I want to lock 12265 H for my first time...
-
sorry, we have a strong signal again
F16 13,6dB (again)
Octagon 12,3dBnew there are 11 channels, I think 10 channels 1 feed
-
Bei mir nicht so stark:
-
Much better now.
-
my signal
-
Again changes, now FEC 1/2:
10970 V 27500 1/2 DVB-S2 QPSK
-
my signal with 3,70m
-
OK, I prefer my tonight signal report instead of yesterday...
(a special thanks to the modulation)even if the mux content doesn't sounds great...
-
10970 V is back on,
Black screen on all channels.
2m,
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!