42.0°E Türksat 3A/4A
-
-
-
-
Alles anzeigen
Die beiden sind eindeutig 11977 und 12015 H, musste eigentlich zu einem lock reichen, versuch mal mit rechtsklick*Tune to freq*
-
Hallo .
Aus Oberfranken mit 1,80 kann ich heute Abend 11977 H problemlos bekommen .
für 12015 H mit 4,7 dB ist Jetzt leider nicht möglich zu locken.
Hello .
From Upper Franconia with 1.80 I can get 11977 H tonight without any problems .
for 12015 H with 4,7 dB is now unfortunately not possible to get a lock .
-
-
-
-
-
Erneuter Versuch mit dem BullsEye - höherer Pegel, aber trotzdem kaum eruierbar wo sich die Türkei-Beams befinden.
Auch direkt an der Antenne war es nicht anders. Von der Tilt-Änderung zeigten sich die Signale auch unbeeindruckt.
Another attempt with the BullsEye - higher level, but still hardly able to find out where the Turkey beams are.
It was no different directly at the antenna. The signals were also unimpressed by the tilt change.
-
-
11674 H 10000 Auto DVBS QPSK, eindeutig Türkiye Beam.
Habe leider keinen Zugriff auf die TV Karte...
Kein lock möglich, vermutlich Datenverkehr?
clearly Türkiye Beam.
Unfortunately I don't have access to the TV card...
No lock possible, presumably data traffic?
Edit:
T3A hat keinen Türkiye Beam, und für Eastbeam ist es sehr schwach.
T3A has not Türkiye Beam and for Eastbeam is the Signal too weak
-
-
-
First time here with türksat-4a Africa south beam
thanks @ AhmedIraqi
[SATTYPE]
1=0420
2=1.80m/IBU
[DVB]
0=4
1=12552,V,22500,2/3,QPSK2 ;8.6 (5.5) dB; 2:43 4/9/2023
2=12587,V,22500,2/3,QPSK2 ;7.7 (4.6) dB; 2:43 4/9/2023
3=12628,V,12500,2/3,8PSK ;9.4 (2.78) dB; 2:43 4/9/2023
4=12657,V,22500,2/3,8PSK ;7.9 (1.28) dB; 2:43 4/9/2023
here it is very close to NigComSat 1R Africa south beam @ 42.5°E
Edit :/*after second look these channels in south beam are the same as in Ka-band in Turksat 4A same SR and with the same FEC !!
-
-
Bad situation for me on 4A.
No possibility for Turkey beam and very weak signal for Eastern Beam.
I don't know if it's only due to my feed's bad setup or the signal has really downgraded in my area comparing 2017 and 2018, as we can see from official footprints where 300cm for Eastern Beam are needed for my QTH
-
-
-
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!